13 62 531 - Coolant temperature sensor - remove and install /check < 13 - Fuel System < BMW 728 - 745i
 
From model '83
REMOVING AND INSTALLING/CHECKING COOLANT TEMPERATURE SENSOR
The temperature sensor measures engine temperature
and sends this information to the control unit in the form of a resistance value.
The resistance value drops as temperature
rises (NTC).
1 = Plug connection
2 = Housing
3 = NTC resistor

3013625 - click to zoom
 
Removing and Installing:
Pull off plug (1).
Unscrew temperature sensor.
Installation:
Tightening torque*.


Siehe auch * See Specifications
2813031 - click to zoom
 
Installation:
Check code number (1)*.
Replace seal (2).
FD = Manufacturing date
Fill and bleed cooling system (Group 17).


Siehe auch * See Specifications
281362060 - click to zoom
 
Checking:
Connect Jetronic test lead 61 1 440.
Check nominal value* with ohmmeter.
To check the entire temperature range, remove
and place temperature sensor in a water bath
heated to testing temperature.
Check resistance with an ohmmeter*.


Siehe auch * See Specifications
1362062 - click to zoom