REMOVING AND INSTALLING
FUEL TANK

From 1980 Models On:

Open tank flap.
Unscrew cap and drain tank.
Lift off rubber cover (1).

73316021 - click to zoom
 
Remove cover (2) on trunk floor plate.
Installation: Check gasket (3), replacing if
necessary.
Pull off plugs (4 and 5).
Detach hose (6) to fuel pump and hose (7) to
return line.
Installation: Use new squeeze-hose clamps.

73316022 - click to zoom
 
Detach guards (8 and 9).

73316023 - click to zoom
 
Remove mounting bolts (10 and 11) from
straps.
Disconnect straps at front and remove.
Installation: Check strap liners, replacing if
necessary.
Lower tank carefully and support from underneath.
Important: Vent hoses!

73316024 - click to zoom
 
Disconnect vent hoses on tank.
Installation: Use new squeeze-hose clamps.
Clamp hoses in holder.

73316025 - click to zoom
 
Installation: Check rubber liner, replacing if
necessary.

73316026 - click to zoom