35 11 000 - Pedal base assembly - remove and install < 35 - Pedals < BMW 728 - 745i
 
From model '83
REMOVING AND INSTALLING
PEDAL BASE ASSEMBLY
Unscrew instrument panel trim at bottom left.
Disconnect battery ground lead.
Installation:
Adjust stop light switch.
Bleed clutch 21 00 006.
Adjust cable.


Siehe auch 21 00 006
73051086 - click to zoom
 
Unscrew steering column casing.
Pull off and disconnect central electric plug
on steering column.
Pull off plug on stop light switch.

73032046 - click to zoom
 
Set steering gear to straight ahead position.
Unscrew bolt and pull steering column out of
splines.
Installation:
Bolt must be located in locking groove.
Replace self-locking nut.
Tightening torque*.


Siehe auch * See Specifications of Gr. 32
73032037 - click to zoom
 
Unscrew bolts on left and right sides.

73032038 - click to zoom
 
Unscrew bolt.

73032040 - click to zoom
 
Unscrew bolts.

73032039 - click to zoom
 
Lift out retainer.
Remove shaft.

63035069 - click to zoom
 
Disconnect accelerator pedal on lever.
Disconnect return spring.

73335045 - click to zoom
 
Disconnect cable.

73035036 - click to zoom
 
Unscrew coolant expansion tank.

73035046 - click to zoom
 
Disconnect cable on firewall.

73035030 - click to zoom
 
Disconnect hydraulic brake booster on base.
Installation:
Tightening torque*.


Siehe auch * See Specifications
73035047 - click to zoom
 
Unscrew feed line (2).
Unscrew line (3).

73035044 - click to zoom
 
Unscrew bolts.

73035048 - click to zoom
 
Unscrew bolts.
Remove base.

73035049 - click to zoom