From model '83
REPLACING KICKDOWN
SWITCH
- For EH Transmission -

Pull off flats male plug.
Unscrew nut.
Unscrew switch.
Installation:
Screw in switch to control distance E*.
Adjusting switch to adjusting procedures for
throttle cable (EH transmission).

73035043 - click to zoom
 
Throttle Cable Adjusting Procedures:
(EH Automatic Transmission)

1. Accelerator pedal on idle stop.

2. Throttle valve in idle position (automatic choke switched off).

3. Adjust cable to remove tension.

4. Adjust full throttle stop that there is still 0.5 mm (0.020") play on full throttle stop
in throttle valve in kickdown position (pedal pressed beyond full throttle stop).
Unscrewing full throttle stop one and one half turns = 0.5 mm (0.020") play.
Lock with M 8 nut.